The One Security Lock For Van Mistake Every Beginning Security Lock For Van User Makes

Choosing the Right Security Lock For Your Van

A good security lock can deter thieves and safeguard your cargo. Some locks are made to be used for DIY installation, but others might require assistance from a professional to ensure that they are installed correctly and offer maximum protection.

Slam locks are ideal for couriers doing multi-drop deliveries, as they lock automatically when you slam the door shut. Deadlocks are used in conjunction with the lock that you have purchased from the manufacturer and provide an additional layer of security.

Dead Locks

Van dead locks are a second physical security measure that provides an effective deterrent for criminals. These aftermarket locks are specially designed and protrude through the door of the van. They are attached to the frame so they can't be opened without the use of a key. They are particularly effective in protecting vans that are parked overnight or carrying expensive equipment.

These are ideal for those who use the factory remote locking systems during the day, but want to add an extra layer of security at night or when their vehicle is located in an area that they feel is vulnerable. They function by putting a bolt into a receiver that's fitted into the opposing body section of the van, when activated by the supplied key. They provide an additional security layer over and above that offered by the manufacturer's locks.

Contrary to Slam locks and Hook Locks (both also available from our online store) that lock automatically when the door is closed These locks require the user to operate using the key supplied. A straight bar lock is suitable for rear doors as well as a twin sliding doors, whereas hook locks can be used on front or rear doors in small to medium vans.

Both are designed to stop a burglar from attempting to open the lock by force it to open, something that could otherwise give them access to your van's cab or load space. They're designed specifically for each model of van and are located in the most optimal position to provide a second layer of protection against a specific attacks.

The repercussions of van theft is significant, particularly for professionals such as tradesmen and contractors who depend on vehicles to transport vital equipment and tools that they cannot afford to lose. Apart from the cost to replace stolen items, it could cause loss of income due to unplanned downtime as well as the hassle of arranging alternative transportation options. Installing a van lock that is of high quality can protect your assets, reduce the risk and deter thieves. It may even help you save on insurance costs.

Hook Locks

Hook locks are an effective deterrent to theft for vans. It is a lock that can be placed on the door of your vehicle. It functions independently of manufacturer's locks and must be operated by a key that is fully controlled by the driver. It features a hook-shaped bolt that cannot be forced to open and is made from high-quality materials. It is also extremely resistant to drilling and manipulation. Sold Secure is the UK's most reliable security product testing body. Many models have been developed to meet police specifications and are certified by Sold Secure.

Consider how much protection your van requires prior to purchasing the security lock. For example, if you transport expensive tools or sensitive cargo, a more advanced lock, such as deadlock or slam lock is the best choice. If you're only transporting items of a lesser value and tools, the simplest slamlock might be sufficient. In addition, you should always examine the insurance policy of your provider to ensure that additional locking mechanisms will not void your insurance coverage.

When you are choosing a security lock system, you must also consider its weather resistance. Your locks must be able to endure a variety of weather conditions as vans are constantly exposed to the elements. They will not diminish their effectiveness or become more susceptible to being manipulated by thieves. It is also recommended to update the software on electronic locking systems in order to increase their efficiency and prevent security vulnerabilities.

In the end, it's important to choose an option that is simple to install. Certain models are made to allow DIY installation, whereas others require professional installation to ensure that they're installed correctly and function as intended. Your skill level, your confidence level and the resources you have will determine if a professional is needed to install the product.

Catalytic converter locks

Catalytic converters reduce harmful emissions from your car. However, this vital part is also a target for thieves because of the precious metals it contains. The black market value for these valuable materials has caused an increase in the theft of converters. There are preventive measures available to tackle this issue.

Many people think that an alarm system that is simple will suffice, but these systems tend to be less effective than a dedicated device designed specifically to safeguard your converter. These devices are designed to detect heat or vibrations and then emit a loud sound to scare away potential thieves. These devices are more akin to deterrents rather than protection systems and tend to be more expensive than a typical locking system.

The Cat Clamp converter lock, a patented design is a tried and tested solution to protect against theft of catalytic converters. The device is constructed of stainless steel cable that runs between the converter and the frame of the vehicle. The cable is wrapped up to seven times and locked, making it extremely difficult for thieves to remove the converter. This converter is easy to install and doesn't require drilling or welding. It is simple to install on a variety of vehicles and is suitable for use on cars, trucks, SUVs, vans, and other vehicles that have the catalytic converter.

A metal plate that covers the entire catalytic converter unit is another option to secure it. While it is not as easy to install as a metal cage but it does make the converter more difficult to steal. The cost of these plates can run between $150 and $270, based on the brand.

It is crucial to remember that no security system is perfect, but taking preventive measures can significantly decrease the risk of theft. It is crucial to make the effort to properly secure your van. This will keep you and all your belongings secure and will save you money by replacing expensive parts. It is also an excellent idea to have your catalytic converter stamped with your VIN number, to help identify it should it be recovered and sold.

Anti-Peel Kits

Created to protect against the popular "Peel and steal" method, this solution is mounted to the front edge of the side load door. This improves the resistance of your van's door to 'peel-and steal attacks by up to 300%. The L4V Anti-Peel Kit, in conjunction with a high-positioned hook lock, decreases the possibility that thieves can gain entry to your van via the side-load door.

It is important to use additional security measures for your van due to the growing number of van crimes and thefts. One of the most advanced methods is referred to as "peel and steal," and consists of thieves stealing tools and goods from vans in a matter of seconds by applying pressure to the doors with their knees, then pulling, bending, and tearing them open to reveal the contents of the load area. This kind of attack is now a common occurrence that has cost tradespeople across the UK thousands of dollars in stock and tools lost.

Locks 4 Vans has launched an innovative high hook lock and an anti peel kit that is designed to solve this growing problem. The Anti-Peel Kit, fitted to the Ford Custom's barn door will reduce the chance of 'peel-and steal attacks by enforcing the door's skin and adding another layer of protection. The high-quality hook locks adds additional strength to the door and keeps it secure in case the anti-peel plates are removed.

On the internet, you can purchase our anti-peel kit range and get it delivered more info to your vehicle within just a few days. Our experts will install the items for you. We have installers in Greater Manchester and Tameside so are able to offer our services to areas like Manchester, Salford, Stockport, Ashton Under Lyne, Oldham and Rochdale.

Contact us if you would like to know more about enhancing the security of your van. We provide a variety of options to increase the security of your van. These include deadlocks, armour locks, and shielding to prevent puncture attacks.

Leave a Reply

Your email address will not be published. Required fields are marked *